Incubator configurator

HettCube 200
HettCube 400
HettCube 600
LLL:non-refrigerated
LLL:refrigerated
LLL:IVDR
LLL:General Purpose
LLL:220 – 240 V 1 ~ / 50 – 60 Hz
LLL:100 – 120 V 1 ~ / 50 – 60 Hz

LLL:Pimcore\Model\DataObject\HettichOption.1

Switchboard

| 4-fold socket strip, as a unit controllable via display, on the back of the device

| LLL:ArticleNumber 60521
Passive dehumidification

| For individual or timed opening of a dehumidification module via the touchscreen

| LLL:ArticleNumber 60042
Independent PT 100 sensor

| For independent temperature measurement, four-wire system, temperature values output with analogue output 4-20 mA on the back of the device

| LLL:ArticleNumber 60503
Additional device access port (Ø 22 mm)

| Centred on the left side of the device. Other positions only possible after consultation

| LLL:ArticleNumber 60006
Additional device access port (Ø 42 mm)

| Centred on the left side of the device. Other positions only possible after consultation

| LLL:ArticleNumber 60007
Additional device access port (Ø 67 mm)

| Centred on the left side of the device. Other positions only possible after consultation

| LLL:ArticleNumber 60008
Glass door

| All-glass outer door for HettCube 200 | 200 R

| LLL:ArticleNumber 60030
Changing the door hinge

| Change from standard door hinge right (i.e. door handle left) to door hinge left (i.e. door handle right)

 

| LLL:ArticleNumber 60044

LLL:Pimcore\Model\DataObject\HettichSlideInSheet

Shelf (HTS-Set), Hight 54 mm
LLL:ArticleNumber 60031

Made of stainless steel, with telescopic rails, pull out up to 70 %, max. load: 40 kg

Shelf (Set), Hight 59 mm
LLL:ArticleNumber 60001

Made of stainless steel, with standard rails, max. load: 50 kg

LLL:Pimcore\Model\DataObject\HettichDrawer

Drawer (HTS-Set), Hight 30 mm
LLL:ArticleNumber 60024

Made of stainless steel, with telescopic rails, pull out up to 70 %, max. load: 40 kg

Drawer (HTS-Set), Hight 65 mm
LLL:ArticleNumber 60025

Made of stainless steel, with telescopic rails, pull out up to 70 %, max. load: 40 kg

Drawer (HTS-Set), Hight 105 mm
LLL:ArticleNumber 60026

Made of stainless steel, with telescopic rails, pull out up to 70 %, max. load: 40 kg

LLL:Pimcore\Model\DataObject\HettichSlideInGrille

Rack (HTS-Set), Hight 24 mm
LLL:ArticleNumber 60036

For inclined storage of cultures (Loewenstein), stainless steel, with telescopic rails, pull out up to 70 %, inclination angle: 5°, Tube: Ø 15-20 mm, max. load: 81 tubes

Rack (Set), Hight 24 mm
LLL:ArticleNumber 60037

For inclined storage of cultures (Loewenstein), stainless steel, with standard rails, inclination angle: 5°, Tube: Ø 15-20 mm, max. load: 81 tubes

Rack, Hight 24 mm
LLL:ArticleNumber 60041

For inclined storage of cultures (Loewenstein), stainless steel, inclination angle: 5°, Tube: Ø 15-20 mm, max. load: 81 tubes

Rack (HTS-Set), Hight 117 mm
LLL:ArticleNumber 60038

For Petri dishes (Ø 90 mm), stainless steel, with telescopic rails, pull out up to 70 %, max. load: 90 pcs.

 

For covering the entire slide-in level, additional selection of Cat. No. 60040 necessary

Rack (Set), Hight 117 mm
LLL:ArticleNumber 60039

For Petri dishes (Ø 90 mm) , stainless steel, with standard rails, max. load: 90 pcs.

 

For covering the entire slide-in level, additional selection of Cat. No. 60040 necessary

Rack, Hight 117 mm
LLL:ArticleNumber 60040

Additional rack for 60038 or 60039, for Petri dishes (Ø 90 mm), stainless steel, max. load: 90 pcs.

LLL:Pimcore\Model\DataObject\HettichRack

Frame L, 16-place
LLL:ArticleNumber 60027

Made of stainless steel, for inclined storage of cultures, angle of inclination: 5° or 20°, for 16 tubes with Ø 15-20 mm, length 100-125 mm

 

Max. 3 racks possible per insertion shelf/drawer

Frame XL, 16-place
LLL:ArticleNumber 60028

Made of stainless steel, for inclined storage of cultures, angle of inclination: 5° or 20° for 16 tubes with Ø 15-20 mm, length 126-170 mm

 

Max. 2 racks possible per insertion shelf/drawer

LLL:Pimcore\Model\DataObject\HettichOption.2

Rolling cabinet

| Lockable with two drawers, incl. lockable castors, W x D x H (mm): 770 x 800 x 550

| LLL:ArticleNumber 60010
Stacking kit

| For safe stacking of two HettCubes 200 | 200 R

| LLL:ArticleNumber 60009
Service: Assembly of the Stacking kit

| For HettCube 200 | 200 R

| LLL:ArticleNumber 60043
USB Port Lock (Set)

| For securing the USB-A interface. Set consisting of 10 securing clips and 1 USB key tool

| LLL:ArticleNumber 60525
Fixing kit (HTS-Set)

| For fixing of shelfs and drawers with telescopic rails

| LLL:ArticleNumber 60919

LLL:currentConfiguration

1
1

LLL:LoadingWeight

LLL:available LLL:occupied LLL:free 80LLL:decimal_separator00 LLL:kg 9LLL:decimal_separator00 LLL:kg 71LLL:decimal_separator00 LLL:kg

LLL:InternalItems

1 x
Shelf (HTS-Set), Hight 54 mm | LLL:ArticleNumber 60031
LLL:infoAvailableHeight
1
1 x
Shelf (Set), Hight 59 mm | LLL:ArticleNumber 60001
LLL:infoAvailableHeight
1