Incubator configurator

HettCube 200 R
HettCube 400 R
HettCube 600 R
General Purpose
LLL:
100 – 120 V 1 ~ / 50 – 60 Hz
LLL:

Options

Switchboard

| 4-fold socket strip, as a unit controllable via display, on the back of the device

| Cat. No. 60521
Independent PT 100 sensor

| For independent temperature measurement, four-wire system, temperature values output with analogue output 4-20 mA on the back of the device

| Cat. No. 60503
Passive dehumidification

| For individual or timed opening of a dehumidification module via the touchscreen

| Cat. No. 60042
Additional device access port (Ø 22 mm)

| Centred on the left side of the device. Other positions only possible after consultation

| Cat. No. 60006
Additional device access port (Ø 42 mm)

| Centred on the left side of the device. Other positions only possible after consultation

| Cat. No. 60007
Additional device access port (Ø 67 mm)

| Centred on the left side of the device. Other positions only possible after consultation

| Cat. No. 60008
Parameter for continuous cooling operation

| For storing samples below 15 °C for more than 2 weeks

| Cat. No. 60526
Glass door

| All-glass outer door for HettCube 200 | 200 R

| Cat. No. 60030
Changing the door hinge

| Change from standard door hinge right (i.e. door handle left) to door hinge left (i.e. door handle right)

 

| Cat. No. 60044

Shelves

Shelf (HTS-Set), Hight 54 mm
Cat. No. 60031

Made of stainless steel, with telescopic rails, pull out up to 70 %, max. load: 40 kg

Shelf (Set), Hight 59 mm
Cat. No. 60001

Made of stainless steel, with standard rails, max. load: 50 kg

Drawers

Drawer (HTS-Set), Hight 30 mm
Cat. No. 60024

Made of stainless steel, with telescopic rails, pull out up to 70 %, max. load: 40 kg

Drawer (HTS-Set), Hight 65 mm
Cat. No. 60025

Made of stainless steel, with telescopic rails, pull out up to 70 %, max. load: 40 kg

Drawer (HTS-Set), Hight 105 mm
Cat. No. 60026

Made of stainless steel, with telescopic rails, pull out up to 70 %, max. load: 40 kg

Racks

Rack (HTS-Set), Hight 24 mm
Cat. No. 60036

For inclined storage of cultures (Loewenstein), stainless steel, with telescopic rails, pull out up to 70 %, inclination angle: 5°, Tube: Ø 15-20 mm, max. load: 81 tubes

Rack (Set), Hight 24 mm
Cat. No. 60037

For inclined storage of cultures (Loewenstein), stainless steel, with standard rails, inclination angle: 5°, Tube: Ø 15-20 mm, max. load: 81 tubes

Rack (HTS-Set), Hight 117 mm
Cat. No. 60038

For Petri dishes (Ø 90 mm), stainless steel, with telescopic rails, pull out up to 70 %, max. load: 90 pcs.

 

For covering the entire slide-in level, additional selection of Cat. No. 60040 necessary

Rack (Set), Hight 117 mm
Cat. No. 60039

For Petri dishes (Ø 90 mm) , stainless steel, with standard rails, max. load: 90 pcs.

 

For covering the entire slide-in level, additional selection of Cat. No. 60040 necessary

Rack, Hight 117 mm
Cat. No. 60040

Additional rack for 60038 or 60039, for Petri dishes (Ø 90 mm), stainless steel, max. load: 90 pcs.

Rack, Hight 24 mm
Cat. No. 60041

For inclined storage of cultures (Loewenstein), stainless steel, inclination angle: 5°, Tube: Ø 15-20 mm, max. load: 81 tubes

Additions to your selection

Stacking kit

| For safe stacking of two HettCubes 200 | 200 R

| Cat. No. 60009
USB Port Lock (Set)

| For securing the USB-A interface. Set consisting of 10 securing clips and 1 USB key tool

| Cat. No. 60525
Fixing kit (HTS-Set)

| For fixing of shelfs and drawers with telescopic rails

| Cat. No. 60919

LLL:currentConfiguration

1
1
2
3

Max. load

total occupied available 0,00 kg 0,00 kg 0,00 kg

Items

1 x
Shelf (HTS-Set), Hight 54 mm | Cat. No. 60031
3 x
Shelf (Set), Hight 59 mm | Cat. No. 60001